General Plumbing in Greater Seattle Area

If your toilet won’t flush and there’s no clog, the problem is usually in the tank or water supply. Check the handle linkage, flapper seal, water level/float, fill valve, and the shutoff valve. Apollo Plumbing repairs toilets 24/7 and arrives with stocked vans, backed by a written guarantee, across Seattle, Everett, and nearby areas.

Quick checks:

• Reconnect a loose chain between handle and flapper.
• Ensure the flapper seals and isn’t warped.
• Confirm the float lets the tank fill.
• Open the water shutoff fully.
• Clean the fill valve or call if it hisses or sticks.

Updated: 2025-12-24 00:00:00

Need help in Seattle, WA? Call (425) 387-1507 or book online.

"Fast, reliable service! Geoff went above and beyond to get the job done." — Jim G.

Plumbing maintenance for a typical home includes routine inspections, functional testing, and cleaning that catch leaks early, protect water heaters, and keep drains and valves working safely. Most issues start as small drip, pressure, or sediment problems that grow into costly damage if ignored.

• Common tasks: check all faucets for leaks and proper operation; inspect under‑sink traps and shutoffs; test emergency shut‑off valves; check outside hose bibs for leaks; inspect vent assembly; verify safe water pressure; assess water quality with a simple drinking water test; and service the water heater (inspection and periodic flushing). Our team performs these checks for many homeowners in the Mukilteo area and can add camera inspections or drain cleaning when diagnostics show buildup. Apollo’s A‑List membership can include routine checks like water pressure and drinking water tests as part of ongoing care. Schedule professional maintenance yearly and sooner if you notice new moisture, odd noises, or changing water pressure.

Updated: 2026-10-27

Need help in Mukilteo, WA? Call (425) 387-1507 or book online. "Geoff from The Apollo Plumbing did an excellent job." — Woody Z.

Plumbing installation in a new home includes a complete water supply system, a drain–waste–vent (DWV) system, and final hookups for all fixtures and appliances, usually completed in rough‑in and finish phases. The rough‑in lays the hidden piping and venting; the finish phase sets fixtures, connects the water heater, and verifies operation. Around Marysville, many homeowners also plan for water filtration or softening during rough‑in to avoid rework later. A good installer also pressure‑tests lines and checks DWV slope so drains self‑clean rather than gurgle.

Key parts typically included:

• Water supply lines with main shutoff and fixture shutoffs
• DWV piping with vents and cleanouts to the sewer or septic
• Water heater setup (tank or tankless) with safety devices and drip pan/drain where required
• Fixture and appliance connections, hose bibbs, and stubs for irrigation or future additions

Have your contractor document valve locations and test results before drywall goes up.

Updated: 2026-10-20

Need help in Marysville, WA? Call (425) 387-1507 or book online. “They arrived quickly, were friendly and professional, and handled the difficult situation with impressive efficiency.” — Patric C.

There isn’t a single “average” price for plumbing installation in a home. Final cost depends on an on-site evaluation, and we provide a firm, upfront price before work begins in Seattle and nearby cities. A-List members pay $49 per service call for just $9.95/month, with complimentary checks. Current specials include $41 off plumbing services. Exact pricing depends on fixture count, pipe type, access, and any code or inspection needs.

• Factors: scope, materials, access, permits/inspections, emergency vs. scheduled.

Updated: 2025-12-24 00:00:00

Need help in Seattle, WA? Call (425) 387-1507 or book online.

"Fast, reliable service! Geoff went above and beyond to get the job done." — Jim G.

A plumbing emergency is any issue causing active water damage, sewage backup, or loss of essential water service. Common examples include burst or leaking pipes, overflowing or blocked drains or toilets, sewer line backups, water main leaks, and water heater failures that leave you without hot water. Apollo Plumbing provides 24/7 emergency response with stocked vans and a written guarantee in Seattle, Everett, and nearby areas.

• Shut off the main water valve.
• Don’t use drains or toilets during a backup.
• Cut power to a leaking water heater.

Updated: 2025-12-24 00:00:00

Need help in Seattle, WA? Call (425) 387-1507 or book online.

"Apollo plumbing got right out to my house the day I called." — Sam H.

Most homes should set a routine plumbing maintenance schedule after an in‑home assessment. Our technician will recommend timing based on your home’s age, materials, water quality, and usage. Apollo’s A‑List membership helps with ongoing upkeep by lowering service-call costs to $49 and includes complimentary water pressure and drinking water tests. We offer 24/7 support and preventative/diagnostic services across Seattle, WA and nearby areas like Everett and Lynnwood.

Quick checks:

• Look for ceiling or under-sink leaks.
• Note slow drains or frequent clogs.
• Listen for running toilets.
• Watch for sudden water‑pressure changes.

Updated: 2025-12-24 00:00:00

Need help in Seattle, WA? Call (425) 387-1507 or book online.

"Fast, reliable service! Geoff went above and beyond to get the job done." — Jim G.